Hydronic Heaters & Fan Coils
Hydronic Heater Rentals
Our Hydronic Heating units are suitable for a multitude of applications. They provide temporary heat when an existing boiler unit is being replaced or repaired or make the perfect addition to a complex heating system requiring high level of customization. Hydronic heating equipment can operate off propane, natural gas, diesel or even tie into a district energy loop.
Features:
- Can be used with portable fan coils or tie directly into a glycol/water loop
- Easily positioned – roll in, forklift or hoist into place
- Our potable stainless steel heat exchanger allow for domestic hot water replacement projects
Temporary Heating Applications:
- HVAC/Boiler Retrofits and System Upgrades
- Temporary Structures
- Industrial Plants
- Building Construction
Equipment Selection:
250k BTU Hydronic
HGB250H11
This compact hydronic heater packs lots of heating punch. A great unit when a small amount of heat is required. It can be utilized as a stand-alone unit for a boiler tie-in or paired with fan coils to heat the air in your space. This boiler can run off propane cylinders or a natural gas feed.
Features:
- For use either with portable fan coils or directly connected to a building’s glycol/water loop
- Positioning is simple — roll, forklift, or hoist into place
- Requires a 115 volt, 15 amp circuit for power
Temporary Heating Applications:
- HVAC Retrofits and System Upgrades
- Temporary Structures
- Boiler Re-Fits
400k BTU Hydronic
HGB400H11
This compact hydronic heater is perfect for medium-sized structures, providing quick heat when needed. Its low-pressure operation and atmospheric venting eliminate the need for special boiler certification or supervision.
Features:
- Tie directly into a building’s heat system or add fan coils for heat distribution.
- Positioning is simple- roll, forklift or hoist into place.
- Weatherproof construction.
- Requires readily available 115-volt single phase power.
Temporary Heating Applications:
- HVAC Retrofits and System Upgrades
- Industrial Plants
- Emergency Heat
980k BTU Hydronic
HGB980H11
This hydronic heater packs lots of heating punch. The capacity is a good size to manage mid range heating projects. Need more capacity? Add additional units for redundancy or increased capacity. These units can be utilized individually as a stand-alone unit for a boiler tie-in or paired with fan coils to heat the air in your space. This boiler can run off propane cylinders or a natural gas feed.
Features:
- For use either with portable fan coils or directly connected to a building’s glycol/water loop
- Positioning is simple — roll, forklift, or hoist into place
- Requires a 208 volt, 50 amp circuit for power
Temporary Heating Applications:
- HVAC Retrofits and System Upgrades
- Temporary Structures
- Boiler Re-Fits
1.2MM BTU Hydronic
HGB1200H21
Whether you need to temporarily replace an existing boiler or you have a complex heating application that requires a high degree of customization, this unit is the one for the job. This hydronic heater requires a fuel source from either a large propane cylinder or direct natural gas hook-up.
Features:
- For use either with portable fan coils or directly into a building’s glycol/water loop using our heat exchangers
- Positioning is simple — roll, forklift or hoist into place
- Requires 208-volt w/ neutral, single-phase power
Temporary Heating Applications:
- HVAC Retrofits and System Upgrades
- Temporary Structures
- Industrial Plants
- Concrete Curing
Hydronic Fan Coils
Hydronic Fan Coils
These stainless-steel hydronic fan coils effectively deliver warm, dry heat into your space. From finished buildings to construction sites, and anywhere else temporary heat is required, our fan coils provide a practical way to deliver distributed heat. A stable, upright design means these units stay in place, and the large soft wheels ensure portability when they need to be removed or relocated. They are available in multiple sizes to ensure the right package is utilized on your project.
Features:
- Easily loaded filter racks allow for drop-in cartridges for air filtration
- Very quiet and reliable operation
- Convenient 115-volt power means easy plug-in and turn-on
Temporary Heating Applications:
- HVAC Retrofits and System upgrades
- Construction Sites
- Special Events
- Tenant improvements
Hydronic Heat Exchangers
Hydronic Heat Exchangers: Potable & Non-Potable
This plate heat exchanger series is the perfect solution for delivering heat into a building. It is an ideal addition to our hydronic heating equipment that ensures a separate fluid loop between our heater and the building. Each unit is equipped with an onboard pump and can deliver hot fluid in any potable or non-potable application.
Features:
- Monitor supply and return loop temperatures
- On board pump with by-pass valve
- Compact design allows this unit to easily fit through any mechanical room door
Temporary Heating Applications:
- Boiler Tie-Ins
- Domestic Hot Water Applications
- Specialized Heating or Cooling Projects
Hydronic Heater at a Hospital
Hydronic Heating A Highrise
Heater Craned Into Place
Commercial Hydronic Heating
Hydronic Heating Retrofit
Testimonials